Safety Tail light Flasher for Interceptor

Safety Tail Light Flasher for Interceptor

The Safety Tail light Flasher for Interceptor enhances rider visibility and safety on the road.
This device works by modulating the intensity and frequency of the tail and brake lights, creating a flashing effect that grabs the attention of other motorists. By providing an extra layer of visual alert, it helps to prevent rear-end collisions, particularly in low-visibility conditions such as nighttime or inclement weather.
Easy to install and compatible with most motorcycle models, these flashers are a simple yet effective way to improve rider safety and ensure a more noticeable presence on the road.

SALIENT FEATURES

• Plug-and-Play Installation: Designed for easy installation, the flasher typically requires minimal tools and no specialized knowledge, allowing riders to quickly and effortlessly enhance their bike’s safety.
• No Extra Switch Required: The device seamlessly integrates with the motorcycle’s existing lighting system, eliminating the need for an additional switch to change or select flash patterns.
• Adjustable Flash Patterns: Allows riders to choose from 8 Tail Light Patterns and 8 Brake Light Patterns, including steady, strobe, and pulsing modes, to suit different riding conditions and personal preferences.
• Pattern Memory: The flasher’s built-in memory saves the selected flash pattern, ensuring consistency every time the motorcycle starts without requiring reconfiguration.
• Durability: Constructed from high-quality industrial grade components that resist vibration, shock, and impact, ensuring long-term durability.
• Compact and Lightweight: Compact design that doesn’t add significant weight or bulk to the motorcycle, preserving the bike’s aesthetics and performance.

How to Select Patterns

TAIL LIGHT PATTERN SELECTION

1. If the vehicle is ON, switch OFF the ignition and wait for 2-5 seconds. (BS3 vehicle should have the parking light switch ON)
2. Switch the ignition ON and OFF 5 times while keeping the brake lever pressed.
3. On the 5th time of switching ON the ignition you will enter the “Tail Light Pattern Selection” MODE.
4. You may now release the brake lever.
5. Every time you press the brake lever and release, you will see the next tail light pattern.
6. The system auto-saves the selected pattern.
7. You may now turn OFF the ignition and then turn it ON after 3 seconds to EXIT the “Tail Light Pattern Selection” MODE.
   OR
   If no brake lever is pressed or ignition switch is not turned OFF for over 10 seconds, the “Tail Light Pattern Selection” MODE will automatically EXIT, and the vehicle can be used.

BRAKE LIGHT PATTERN SELECTION

1. Turn ON the ignition without any brake lever pressed.
   (BS3 vehicle should have the parking light switch ON)
2. Immediately after turning ON the ignition press the brake lever for 10 times within 6 seconds.
3. On the 10th time of pressing the brake lever you will enter the “Brake Light Pattern Selection” MODE.
4. Press the brake lever to see the brake pattern.
5. To change the brake light pattern turn OFF ignition and turn it ON immediately . The pattern will shift to the next.
   You can check the pattern by pressing the brake lever.
6. To save the selected pattern wait for 3 seconds without pressing the brake lever or switching OFF the ignition.
   The brake light will light up steady for 1 second and turn off and Tail light pattern will start blinking, to confirm that the pattern is saved and the “Brake Light Pattern Selection” MODE will automatically EXIT.