SAFETY LED Indicator HAZARD System ROYAL ENFIELD
Features:
1. Use as Emergency Signal.
2. Always be visible during heavy fog and rainfall
3. Speed alert for other vehicles on the highways.
4. 70% brighter than stock bulb indicators.
5. Group Ride Signature.
6. Easy and hassle free installation.
7. Longer life than stock bulb indicators.
ACTIVATING & DEACTIVATING the HAZARD SYSTEM
- Switch on the ignition of your motorcycle
- Your indicators should be in OFF position
- Now push your indicator switch to the RIGHT – Quick LEFT – Quick Right – Quick LEFT- Press in the middle. ( Full operation should be done without any long pause )
- Your HAZARD should now be Activated.
- To switch Deactivate HAZARD, switch ON any indicator.
- To reactivate follow Step 3
Changing HAZARD Flashing Patterns
- Your Hazard should be Activated.
- Quickly Switch ON and OFF your parking lights.
- You will go to the next mode.
Please Note. – If you wish to have your Parking Lights or Headlight ON during the HAZARD is Activated, your mode will not change.
Only if the Parking switch is turned ON and OFF quickly, the Pattern will shift to the next one.
WHAT WILL BE INCLUDED IN THE KIT
- 4 x LED Indicator conversion boards
- HAZARD Controller
- LED Indicator Flashing Unit
- 5 x Cable Ties ( needed to tie wires and controller )
- Wire Sleeves
Play the video at 480p or above. Else the flashing patterns will not be much illustrative.
Installation Guide of LED Indicators from NOVATRONIX for Royal Enfield
PART – 1
Installation Guide of the HAZARD System
PART – 2
** Warranty void if the unit it manhandled or water damaged.
Anil Kumar (verified owner) –
Easy to install
Sanjay Desai (verified owner) –
Truely Invisible.
Rohan Sharma (verified owner) –
I must say that it extended my battery life.
Anil Kumar (verified owner) –
Truely Invisible.
Rajiv Singh (verified owner) –
Truely Invisible.
amit.is.arora04 –
This product can be installed in bullet 350 standard
Novatronix (verified owner) –
Yes .. It does..
durlabh_maharishi (verified owner) –
I have installed the system, all LED indicators are functional, but for some reason the hazard function doesn’t always activate. After two weeks, my experience is that 9 times out of 10 the hasard system fails to activate. I have rechecked all wiring, have also minutely checked the combination to activate the hasard (right-left-right-left-center), but it refuses to work. I have tried the combination quickly, very quickly, medium pace and slow..but it hasnt worked. Got a friend to try it as well, but the result was the same. The indicator function is working and the hasard has worked a few times, therefore I am sure that the the system is getting the current it needs and the wiring is correct. But somehow the hasard does not always work when I want it to.
To request your help, I have tried caling on your mobile number (Mr Roy’s number) 6 times during the week in office hours…but it kept ringing and the calls were never answered. I dont know what to do now. Any help, would be much appreciated.
Novatronix (verified owner) –
Sorry to hear about the problem you are facing.
Please update us with your order number or leave a whatsapp message on 9831356789. We will call you back to solve your problem.
tatarun01 –
Its a query please help ..how can i install this in bajaj avenger old model..please tell or upload a video regarding it
Novatronix (verified owner) –
For Bajaj Avenger you need this..
https://novatronixlabs.com/product/led-indicator-hazard-system-for-new-thunderbird/
Dinoy –
Why do you remove the indicator bulb in the console? what do i replace it with?
Novatronix (verified owner) –
If not removed the indicators will not function properly.
If you want that light to work again, you can contact us we have a solution.
deepakcdk.c –
It is query If this installed whether it will work with Headlight in “on” condition
Means while riding in foggy day headlight is ON and in HIGH BEAM , Will this pattern indicator will work or not??
Novatronix (verified owner) –
Yes it will work.
Khushal (verified owner) –
Bought it a month ago for my Classic 500 and its an absolutely awesome product. The LED’s provided are super bright. Connected it by myself. Proved to be very useful during the rainy season. It works with Eclipse Bar end lights effortlessly and they blink in the patterns as well, thus making it look more spectacular. Mr. Chandan Roy is a calm and gem of a person. Thank you so much for helping during the installation process. Keep up the good work !! Kudos to Novatronix!!
Alex (verified owner) –
Awesome product easy installation.. I am very much satisfied
Shantanu rana –
Can u please tell the connection information for standard 350 bsIV model and how to add extra switch to make it work.
Please give detailed information and video also.it will help many people like me.who all are confused.
Novatronix (verified owner) –
It’s very easy. You just have to provide a positive connection to the BLUE wire via an extra switch.
naveen.mike –
It’s been almost a year m using this system….but nw ryt side indicators r not blinking…they r on al the time when I turn on the key…..
Novatronix (verified owner) –
Seems like an water damage. You you can contact us over the phone or mail we can help you out. If needed will replace the damaged part.
Jitesh Sawhney –
Sir , I installed this NOVATRONIX System , 2 months ago.
But now when i turn once right then left and again right and then left and press at centre , the hazard light doesn’t get started , but all the indicators are working well and even i checked the connections twice. Reply as soon as possible.
Novatronix (verified owner) –
You are doing it wrong. RIGHT-LEFT-RIGHT-LEFT-CENTER is the correct sequence.
Ezhilan Joseph (verified owner) –
The product is awesome, thanx much !
Just one query, I would like to retain the indicator on the gauge, any solution for it ?
Novatronix (verified owner) –
Thank you for the appreciation.. Yes there is a small hack to get that indicator guage working again.
Santosh –
hi ,
i have classic 350 2017 MOdel where no switch for Headlight on and off . how to install on that
Novatronix (verified owner) –
You will need an extra switch to change the paterns. Or if you have fog lights installed, the same switch will work for changing the patterns.
rakesh (verified owner) –
Sir, i used this system about a month ago but now when i turned the right indicator and then left and then right then left nothing will happen simlpy one side indicator is working … what is happen
Novatronix (verified owner) –
Please chek the connections.
If it does not work, send it back to us and we will replace it.
nawfal.najeem –
I wanna know one thing before installing the hazard lights. If I install this product, does it mean that I can no longer use the “Indicator Blinkers or Notification” on my gauge?
Novatronix (verified owner) –
Yes you an.. There is a way..
You an ontat us and we will guide you with the solution.
Navdeep Kumar (verified owner) –
Very nice product. Eye catchy. I bought it 2 months back for my Royal Enfield Desert Storm and its working fine. There was quick support from the Novatronix team during installation. The LEDs were not working in the correct pattern but it was sorted. Installed it myself.
swapnilchavan19960312 (verified owner) –
Thank you so much, Mr. Chandan Roy for the help. Guys if you have any query you can call Mr. Chandan Roy, no need of any expert mechanic.you can do it yourself.
Amit (verified owner) –
Thanks for your support Mr. C. Roy.
Sanath (verified owner) –
Its been a month i have installed the light system. However i see that copule of LED are not working in the LED plate
Novatronix (verified owner) –
The product has a 1-Year replacement warranty. Please send the faulty lights back to us and we will replace them.
Prashanth K R (verified owner) –
I have installed hazard lights after installation I have oned my left indicator light but the right side light is also working at same time again I turned of my indicator then I oned right side indicator but again right indicator is getting on but my hazard system is not working
Novatronix (verified owner) –
You have to remove the small indicator bulb from the speedometer.The bulb is just on the right side of the Neutral light.
Prashanth K R (verified owner) –
After installing lights I have switched on my left indicator but the right one is also working same time, again turned of thn I oned right side but again left indicator light is getting on, I’m not understanding y this happening even my hazard system is also not getting on
Novatronix (verified owner) –
You have to remove the small indicator bulb from your speedometer console.
The bulb just on the right of your neutral light.
ATHUL KRISHNAN (verified owner) –
Very nice product,everybody on the road notices it and everybody ask about it.very nice support from Novatronix and fitted it my own
Ketan –
Complete head turner for the fellow riders on the road. Enjoying the everyone’s attention on the road.
Ashley (verified owner) –
Its simply the best thing ever my bike could get for the long rides thank you Mr.Roy , but the installation needs to be done by a good mechanic only mandatory. Installed on Royal Enfield Desert storm 500.
Amesh Divkar (verified owner) –
Received it today… installed it working super fine. Awesome hazard lights system. All thanx to Mr. Chandan for your support.
I will recommend it to all royale lovers.
guri –
how to instal in old model std 350 plz tell…this product suitable for old model
nemo4all (verified owner) –
Same instruction video should be followed, and it works fine on the older standard 350cc
ninad.deorukhakar –
Please help me for installation here, i have Standard 350cc which is without self start. i saw all installation procedure which is very helpful, but i confused that where to connect the RED wire of hazard ( you mentioned that it goes to the blue of ignition), but i don’t have that ignition connector (there is one connector with 4 wires color grey, black, red and Red-white bicolor but it goes to the battery indicator) i cant make out it properly. i want to order the product. Please show me with demo if possible ([email protected])
nemo4all (verified owner) –
The RED wire of the hazard unit should be connected to the RED-WHITE wire of your ignition.
If still confused, call us on the given numbers, and we will guide you over the phone.
Ankush (verified owner) –
I installed these in my bajaj avenger 220 and these lights are awesome you will notice the real diffrence on the first blink itself your indicators are on a whole new level of brightness. I did installed it on my own and honestly i don’t know anthing about bike’s wiring system but the awesome support provided by Mr. Chandan roy on call and watsapp on a sunday i was able to install these on my own . Thank you guys and Mr. Chandan roy thanks for the support.
Hardeep Singh (verified owner) –
Received this yesterday and installed today. Great hazard light system I must say. Special Thanks to Mr Chandan Roy for providing support over phone while I faced some issue while installing the system.
But still waiting for turn light indicator led…….
Teny varghese –
What about the guaranty warranty details?
nemo4all –
1 Year replacement warranty
Nihar –
Can you please answer to Ravis query? I am wondering too on what will happen if the turn indicator bulb is not removed after we install the LEDs as demonstrated in the video.
nemo4all (verified owner) –
If the turn indicator is not removed, all four indicators will flash together no matter which side indicator you switch ON.
Ravi –
In the installation video why are you removing the turn indicator bulb from the front – what happens if i dont remove the same (other than the bulb will flash continously)
Rahul (verified owner) –
Received the Product Today
It is awesome and very easy to install
HARITEJ (verified owner) –
Fantastic DIY hazard installation kit. Especially loved the heat shrink tubes, wiring and insulation was such a hassle otherwise. Great job, team Novatronix. Attention to detail is excellent! Works like a charm. Installation takes 30 mins max. Installation video is very detailed and nice, real heads turner this one! Just go for it!
sumit –
looks grt…. gonna get 1 soon…… grate work…… i use to order strobes and hazard lights from U.K,U.S, finally got smting awsm and value for money
Reynold –
One of the best hazard warning lights system in the market. I have installed it and works very well as shown in the video. One must have this system installed in their rides. Gud job NOVATRONIX.
Reynold –
I have got the delivery long back and still waiting for the “How to install? video. Please do the need full at earliest.
Joy –
The installation videos have been uploaded long time back on the product page.
Please find the videos here.
https://www.youtube.com/watch?v=B9553ZzTIUM
and
https://www.youtube.com/watch?v=nM3rvhoBXbk